Popular Design for Galvanised Reinforcing Mesh - Woven Wire Mesh For Sieving,Screening,Shielding And Printing – Anping
Popular Design for Galvanised Reinforcing Mesh - Woven Wire Mesh For Sieving,Screening,Shielding And Printing – Anping Detail:
Plain Weave
The simplest and most commonly used type with square openings. It is woven by alternating the weft wire over and under the warp wire and permits positive control of size of materials to be screened or filtered.
Twill Weave
Each weft wire passes alternately over and under 2 warp wires, staggered on successive warps. It is used where fine mesh must carry a heavy load.
Oblong Weave
Also known as broad weave, it is made preferably in plain weave with an opening ratio (length/width) of 3:1. Other ratios are possible. Triple warp weave is also available to provide large open areas. It is used for vibrating sieving screens or other architectural applications.
3-Heddle Weave
In this weave type, every warp wire alternately passes up and down each one and two weft wires alternately. Similarly, each weft wire goes alternately up and down of each and two warp wires. It is widely used in industry filters, filter discs and filter cylinders for filtration.
5-Heddle Weave
In this weave type, every warp wire alternately up and down each single and four weft wires and vice versa. It provides a rectangular opening and offers high flow rates. It is widely used in filtration of petroleum & chemical industries.
Specification
Material: Stainless Steel,SS304,SS316,SS316L, SS201,SS321,SS904,etc. Brass, Copper, Nickel, silver, monel alloy, inconel alloy, hastelly alloy, iron chrome aluminum alloy, iron wire carbon steel like 65mn, galvanized wire, etc.
Wire diameter: 0.02–2 mm
Mesh count: 2.1–635 mesh
Aperture width: 0.02–10.1 mm
Open screening area: 25% – 71%
Fine Mesh
Mesh Count | Wire Diameter (d) | Aperture Width (w) | Open Screening Area | Mass | Aperture Quantities 1 cm2 |
No. | mm | mm | % | kg/m2 | |
635 | 0.02 | 0.02 | 25 | 0.127 | 62500 |
508 | 0.025 | 0.025 | 25 | 0.159 | 40000 |
450 | 0.027 | 0.03 | 27.7 | 0.162 | 31388 |
400 | 0.027 | 0.036 | 32.7 | 0.147 | 24800 |
363 | 0.03 | 0.04 | 32.7 | 0.163 | 20424 |
325 | 0.035 | 0.043 | 30.4 | 0.199 | 16372 |
314 | 0.036 | 0.045 | 30.9 | 0.203 | 15282 |
265 | 0.04 | 0.056 | 34 | 0.212 | 10885 |
250 | 0.04 | 0.063 | 37.4 | 0.197 | 9688 |
210 | 0.05 | 0.071 | 34.4 | 0.262 | 6836 |
202 | 0.055 | 0.071 | 31.8 | 0.305 | 6325 |
200 | 0.053 | 0.074 | 34 | 0.281 | 6200 |
200 | 0.05 | 0.08 | 37.9 | 0.244 | 6200 |
188 | 0.055 | 0.08 | 35.1 | 0.285 | 5478 |
170 | 0.055 | 0.094 | 39.8 | 0.258 | 4480 |
150 | 0.071 | 0.1 | 34.6 | 0.366 | 3488 |
154 | 0.065 | 0.1 | 36.7 | 0.325 | 3676 |
200 | 0.03 | 0.1 | 61 | 0.078 | 6200 |
150 | 0.06 | 0.11 | 41.9 | 0.269 | 3488 |
130 | 0.08 | 0.112 | 34 | 0.423 | 2620 |
140 | 0.06 | 0.12 | 44.4 | 0.254 | 3038 |
120 | 0.09 | 0.12 | 32.7 | 0.49 | 2232 |
124 | 0.08 | 0.125 | 37.2 | 0.396 | 2383 |
110 | 0.09 | 0.14 | 37.1 | 0.447 | 1876 |
106 | 0.1 | 0.14 | 34 | 0.529 | 1742 |
100 | 0.11 | 0.14 | 31.4 | 0.615 | 1550 |
100 | 0.1 | 0.15 | 36 | 0.508 | 1550 |
100 | 0.1 | 0.16 | 37.9 | 0.488 | 1550 |
91 | 0.12 | 0.16 | 32.7 | 0.653 | 1284 |
80 | 0.14 | 0.18 | 31.6 | 0.784 | 992 |
84 | 0.1 | 0.2 | 44.4 | 0.42 | 1094 |
79 | 0.12 | 0.2 | 39.1 | 0.572 | 967 |
77 | 0.13 | 0.2 | 36.7 | 0.65 | 919 |
46 | 0.15 | 0.4 | 52.9 | 0.505 | 328 |
70 | 0.1 | 0.261 | 52 | 0.354 | 760 |
65 | 0.1 | 0.287 | 54.6 | 0.331 | 655 |
61 | 0.11 | 0.306 | 53.6 | 0.307 | 577 |
56 | 0.11 | 0.341 | 56.8 | 0.283 | 486 |
52 | 0.12 | 0.372 | 56.8 | 0.374 | 419 |
47 | 0.12 | 0.421 | 60.3 | 0.342 | 342 |
42 | 0.13 | 0.472 | 61.2 | 0.306 | 273 |
Coarse Mesh
Mesh Count | Wire Diameter (d) | Aperture Width (w) | Open Screening Area | Mass | Aperture Quantities 1 cm2 |
No. | mm | mm | % | kg/m2 | |
2.1 | 2 | 10.1 | 69.7 | 3.95 | 0.68 |
3 | 1.6 | 6.87 | 65.8 | 3.61 | 1.4 |
3.6 | 2 | 5.06 | 51.3 | 6.77 | 2.01 |
4 | 1.2 | 5.15 | 65.8 | 2.71 | 2.48 |
4 | 1.6 | 4.75 | 56 | 4.81 | 2.48 |
5 | 1.2 | 3.88 | 58.3 | 3.38 | 3.88 |
5 | 1.6 | 3.48 | 46.9 | 6.02 | 3.88 |
6 | 0.9 | 3.33 | 62 | 2.28 | 5.58 |
6 | 1.2 | 3.03 | 51.3 | 4.06 | 5.58 |
8 | 0.7 | 2.48 | 60.8 | 1.84 | 9.92 |
8 | 1 | 2.18 | 46.9 | 3.76 | 9.92 |
8 | 1.2 | 1.98 | 38.7 | 5.41 | 9.92 |
10 | 0.4 | 2.14 | 71 | 0.75 | 15.5 |
10 | 0.5 | 2.04 | 64.5 | 1.18 | 15.5 |
10 | 0.6 | 1.94 | 58.3 | 1.69 | 15.5 |
12 | 0.4 | 1.72 | 65.8 | 0.9 | 22.32 |
12 | 0.5 | 1.62 | 58.3 | 1.41 | 22.32 |
12 | 0.65 | 1.47 | 48 | 2.38 | 22.32 |
14 | 0.5 | 1.31 | 52.5 | 1.65 | 30.38 |
16 | 0.4 | 1.19 | 56 | 1.2 | 39.68 |
16 | 0.5 | 1.09 | 46.9 | 1.88 | 39.68 |
18 | 0.4 | 1.01 | 51.3 | 1.35 | 50.22 |
18 | 0.5 | 0.91 | 41.7 | 2.12 | 50.22 |
20 | 0.3 | 0.97 | 58.3 | 0.85 | 62 |
20 | 0.35 | 0.92 | 52.5 | 1.15 | 62 |
20 | 0.4 | 0.87 | 46.9 | 1.5 | 62 |
20 | 0.5 | 0.77 | 36.8 | 2.35 | 62 |
24 | 0.36 | 0.7 | 43.5 | 1.46 | 89.28 |
30 | 0.25 | 0.6 | 49.7 | 0.88 | 139.5 |
30 | 0.3 | 0.55 | 41.7 | 1.27 | 139.5 |
35 | 0.25 | 0.5 | 44.4 | 1.03 | 189.9 |
40 | 0.2 | 0.44 | 46.9 | 0.75 | 248 |
40 | 0.25 | 0.39 | 36.8 | 1.18 | 248 |
45 | 0.25 | 0.31 | 31 | 1.32 | 313.88 |
50 | 0.18 | 0.33 | 41.7 | 0.76 | 387.5 |
50 | 0.2 | 0.31 | 36.8 | 0.94 | 387.5 |
50 | 0.23 | 0.28 | 29.9 | 1.24 | 387.5 |
60 | 0.12 | 0.3 | 51.3 | 0.41 | 558 |
60 | 0.16 | 0.26 | 38.7 | 0.72 | 558 |
60 | 0.18 | 0.24 | 33 | 0.91 | 558 |
70 | 0.12 | 0.24 | 44.8 | 0.48 | 759.5 |
80 | 0.12 | 0.2 | 38.7 | 0.55 | 992 |
Product Display
Product detail pictures:
Related Product Guide:
Our advancement depends over the highly developed devices, excellent talents and continually strengthened technology forces for Popular Design for Galvanised Reinforcing Mesh - Woven Wire Mesh For Sieving,Screening,Shielding And Printing – Anping , The product will supply to all over the world, such as: Colombia, Myanmar, Guatemala, We have a large share in global market. Our company has strong economic strength and offers excellent sale service. We have established faith, friendly, harmonious business relationship with customers in different countries. , such as Indonesia, Myanmar, Indi and other Southeast Asian countries and European, African and Latin American countries.
By Dolores from Morocco - 2018.05.15 10:52
This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!
By Madeline from Chile - 2018.02.08 16:45